Merck & Co., Inc. is a global research-driven pharmaceutical products company. Committed to bringing out the best in medicine
Contact usWorldwide
HomeAbout MerckProductsNewsroomInvestor InformationCareersResearchLicensingThe Merck Manuals

The Merck Manual--Second Home Edition logo
 
click here to go to the Index click here to go to the Table of Contents click here to go to the search page click here for purchasing information
Chapter 114. Tooth Disorders
Topics: Introduction | Cavities | Pulpitis | Periapical Abscess | Impacted Teeth | Malocclusion
 
green line

Cavities

Cavities (dental caries) are decayed areas in the teeth, the result of a process that gradually dissolves a tooth's hard outer surface (enamel) and progresses toward the interior.

Along with the common cold and gum disease, cavities are among the most common human afflictions. If cavities are not properly treated by a dentist, they continue to enlarge. Ultimately, an untreated cavity can lead to tooth loss.

For tooth decay to develop, a tooth must be susceptible, acid-producing bacteria must be present, and food must be available for the bacteria to thrive. A susceptible tooth is one that has relatively little protective fluoride incorporated into the enamel or that has pronounced pits, grooves, or fissures that retain plaque. Poor oral hygiene that allows plaque and tartar to accumulate can accelerate this process. Although the mouth contains large numbers of bacteria, only certain types generate acid, which causes decay. The most common decay-causing bacterium is Streptococcus mutans.

Some people have especially active decay-causing bacteria in their mouth. A parent may pass these bacteria to a child through kissing or sharing eating utensils. The bacteria flourish in the child's mouth after the first teeth come in and can then cause cavities. So a tendency toward tooth decay that runs in families does not necessarily reflect poor oral hygiene or bad eating habits.

Progression of Tooth Decay: Decay in the enamel progresses slowly. After penetrating into the second layer of the tooth--the somewhat softer, less resistant dentin--decay spreads more rapidly and moves toward the pulp, the innermost part of the tooth, which contains the nerves and blood supply. Although a cavity may take 2 or 3 years to penetrate the enamel, it can travel from the dentin to the pulp--a much greater distance--in as little as a year. Thus, root decay that starts in the dentin can destroy a lot of tooth structure in a short time.

click here to view the figure See the figure Types of Cavities.

Smooth surface decay, the most preventable and reversible type, grows the slowest. In smooth surface decay, a cavity begins as a white spot where bacteria dissolve the calcium of the enamel. Smooth surface decay between the teeth usually begins between the ages of 20 and 30.

Pit and fissure decay, which usually starts during the teen years in the permanent teeth, forms in the narrow grooves on the chewing surface and on the cheek side of the back teeth; this decay progresses rapidly. Many people cannot adequately clean these cavity-prone areas because the grooves are narrower than the bristles of a toothbrush.

Root decay begins on the root surface covering (cementum) that has been exposed by receding gums, usually in people past middle age. This type of decay often results from difficulty cleaning the root areas, a lack of adequate saliva flow, a diet high in sugar, or a combination of these factors. Root decay can be the most difficult type of tooth decay to prevent.

Symptoms

Whether tooth decay causes pain depends on which part of the tooth is affected and how deeply the decay extends. A cavity in the enamel causes no pain; the pain starts when the decay reaches the dentin. A person may feel pain only when drinking something cold or eating candy. This indicates that the pulp is still healthy. If the cavity is treated at this stage, the dentist can restore the tooth, and most likely no further pain or chewing difficulties will develop.

A cavity that gets close to or actually reaches the pulp causes irreversible damage. Pain lingers even after a stimulus (cold water, for example) is removed. The tooth may even hurt without stimulation (spontaneous toothache).

If irreversible damage to the pulp occurs and the pulp subsequently dies, the pain may stop temporarily. The tooth then may become sensitive when the person bites or when the tongue or a finger presses on it, because the area at the end of the root has become inflamed or because infection has caused an abscess (a collection of pus). Pus accumulating around the tooth tends to push the tooth out of its socket. Biting pushes it back in place. This action causes extreme pain. Pus can continue to accumulate and cause swelling in the adjacent gum tissues or can spread more broadly through the jaw (cellulitis) and drain into the mouth or even through the skin near the jaw.

Diagnosis and Prevention

If a cavity is treated before it starts to hurt, the chance of damage to the pulp is reduced, and more of the tooth structure is saved. To detect cavities early, a dentist inquires about pain, examines the teeth, probes the teeth with dental instruments, and may take x-rays. A person should have a dental examination every 6 to 12 months, though not every examination will include x-rays. Depending on the dentist's assessment of a person's teeth, x-rays may be taken every 12 to 36 months.

Five general strategies are key to preventing cavities: good oral hygiene, proper diet, fluoride, sealants, and antibacterial therapy.

Oral Hygiene: Good oral hygiene, which involves brushing before or after breakfast and before bedtime and flossing daily to remove plaque, can effectively control smooth surface decay. Brushing helps prevent cavities from forming on the top and sides of the teeth, and flossing gets between the teeth where a brush cannot reach.

Electric and ultrasonic toothbrushes are excellent, but an ordinary toothbrush, used properly, is quite sufficient. Normally, proper brushing takes only about 3 minutes. Floss is gently moved back and forth between the teeth, then wrapped around the tooth and root surfaces in a "C" shape at the gum line. With the person using a vertical sliding motion, floss can remove plaque and food debris.

Initially, plaque is quite soft, and removing it with a soft-bristled toothbrush and dental floss at least once every 24 hours makes decay unlikely. Once plaque begins to harden, a process that begins after about 24 hours, removing it becomes more difficult.

Diet: Although all carbohydrates can cause tooth decay to some degree, the biggest culprits are sugars. All simple sugars, including table sugar (sucrose) and the sugars in honey (levulose and dextrose), fruit (fructose), and milk (lactose), have the same effect on the teeth. Whenever sugar comes in contact with plaque, Streptococcus mutans bacteria in the plaque produce acid. The amount of sugar eaten is of little consequence; the amount of time the sugar stays in contact with the teeth is the important issue. Thus, sipping a sugary soft drink over an hour is more damaging than eating a candy bar in 5 minutes, even though the candy bar may contain more sugar.

A person who tends to develop cavities should eat sweet snacks less often. Rinsing the mouth after eating a snack removes some of the sugar; brushing the teeth is more effective. Drinking artificially sweetened soft drinks also helps, although diet colas contain acid that can promote tooth decay. Drinking tea or coffee without sugar also can help people avoid cavities, particularly on exposed root surfaces.

Fluoride: Fluoride can make the teeth, particularly the enamel, more resistant to the acid that helps cause cavities. Fluoride taken internally is effective while the teeth are growing and hardening--until about age 11. Water fluoridation is the most efficient way to supply children with fluoride, and over half of the United States population now has drinking water with enough fluoride to reduce tooth decay. However, if a water supply has too much fluoride, the teeth can become spotted or discolored (fluorosis). If a child's water supply does not have enough fluoride, a doctor or dentist can prescribe sodium fluoride drops or tablets. A dentist may apply fluoride directly to the teeth of a person of any age who is prone to tooth decay. Fluoridated toothpaste and concentrated mouth rinses containing fluoride are beneficial for adults as well as children.

Sealants: Sealants protect hard-to-reach pits and fissures (grooves), particularly on the back teeth. After thoroughly cleaning the area to be sealed, a dentist roughens the enamel with an acid solution to help the sealant adhere to the teeth. The dentist then places a liquid plastic in and over the pits and fissures of the teeth. When the liquid hardens, it forms such an effective barrier that any bacteria inside a pit or fissure stop producing acid because food can no longer reach them. About 90% of the sealant remains after 1 year and 60% after 10 years. The occasional need for repair or replacement of sealants can be assessed at periodic dental examinations.

Antibacterial Therapy: For people who are very prone to tooth decay, antibacterial therapy may be needed. The dentist first removes decayed areas and seals all pits and fissures in the teeth. Then the dentist prescribes a powerful mouth rinse (chlorhexidine) for several weeks to kill off the bacteria in any remaining plaque. The hope is that less harmful bacteria will replace the cavity-causing bacteria. To keep bacteria under control, the person may use daily home fluoride rinses and chew gum containing xylitol (a sweetener that inhibits the bacteria in plaque).

click here to view the sidebar See the sidebar A Brighter Smile Through Cosmetic Dentistry.

Treatment

If decay is halted before it reaches the dentin, the enamel can actually repair itself (remineralization) in conjunction with fluoride therapy. Fluoride treatment requires use of prescription-strength fluoride-containing mouthwash. Once decay reaches the dentin, the dentist drills out the decayed material inside the tooth and then fills the resulting space with a filling (restoration). Treating the decay at an early stage helps maintain the strength of the tooth and limits the chance of damage to the pulp.

Fillings: Fillings are made of various materials and may be put inside the tooth or around it. Silver amalgam (a combination of mercury, silver, copper, tin, and, occasionally, zinc, palladium, or indium) is most commonly used for fillings in back teeth, where strength is important and the silver color is relatively inconspicuous. Silver amalgam is relatively inexpensive and lasts an average of 14 years, but with good oral hygiene the amalgam can last for more than 40 years. The minute amount of mercury that escapes from silver amalgam is too small to affect health. Gold fillings (inlays and onlays) are more expensive, and at least two dental visits are required to permanently place them.

Composite resins and porcelain fillings are used in the front teeth, where silver would be conspicuous. Increasingly, these fillings are also being used in back teeth. Although they have the advantage of being the color of the teeth, they are more expensive than silver amalgam and may not last as long, particularly in the back teeth, which take the full force of chewing.

Glass ionomer, a tooth-colored filling, is formulated to release fluoride once in place, a benefit for people prone to tooth decay. Glass ionomer is also used to restore areas damaged by overzealous brushing.

Root Canal Treatment and Tooth Extraction: When tooth decay advances far enough to permanently harm the pulp, the only way to eliminate pain is to remove the pulp by root canal (endodontic) treatment or tooth extraction.

If a tooth is extracted, it should be evaluated for replacement as soon as possible. Otherwise, neighboring teeth may change position and alter the person's bite.

click here to view the sidebar See the sidebar Root Canal Treatment for a Badly Damaged Tooth.

Bridges and Crowns: The replacement for an extracted tooth may be a bridge--a fixed partial denture in which teeth on either side of the missing tooth are covered with crowns--or a removable partial denture. Also, implants may be used to replace missing teeth.

click here to view the figure See the figure Crowns, Bridges, and Implants.

A crown is a restoration that fits over a tooth. Getting a properly shaped crown usually takes two visits to the dentist, although sometimes several visits are needed. On the first visit, the dentist prepares the tooth by tapering it slightly, takes an impression of the prepared tooth, and puts a temporary crown on it. A permanent crown is then fashioned in a dental prosthetics laboratory, using the impression. On the next visit, the temporary crown is removed, and the final crown is permanently cemented onto the prepared tooth.

Usually, crowns are made of an alloy of gold or another metal. Porcelain can be used to mask the color of the metal. Crowns also may be made entirely of porcelain, although porcelain is harder and more abrasive than tooth enamel and may cause wear on the opposing tooth. Also, crowns made entirely of porcelain or similar material have a slightly greater tendency to break than those made of metal.

Site MapPrivacy PolicyTerms of UseCopyright 1995-2004 Merck & Co., Inc.